NSN 4720-01-486-4275 · NIIN 014864275 · FSC 4720
NO DASHES 4720014864275
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Application: ENVIRONMENTAL CONTROL SYSTEM COOLANT LINE
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.026 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 265.0 |
| ABKG | BOLT CIRCLE DIAMETER | SECOND END INCHES NOMINAL 1.230 |
| ABKG | BOLT CIRCLE DIAMETER | FIRST END INCHES NOMINAL 1.230 |
| ABKU | FLANGE THICKNESS | FIRST END INCHES NOMINAL 0.675 |
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.675 |
| ABKV | OUTSIDE DIAMETER | INCHES MINIMUM 1.250 AND INCHES MAXIMUM 1.560 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 4.500 |
| AECS | BOLT HOLE QUANTITY | 5 |
| AEPR | FLANGE OUTSIDE DIAMETER | SECOND END INCHES NOMINAL 1.743 |
| AEPR | FLANGE OUTSIDE DIAMETER | FIRST END INCHES NOMINAL 1.743 |
| AGAV | END ITEM IDENTIFICATION | ENVIRONMENTAL CONTROL SYSTEM COOLANT LINE |
| AHNX | BOLT HOLE DIAMETER | FIRST END INCHES MINIMUM 0.035 AND INCHES MAXIMUM 0.040 |
| AHNX | BOLT HOLE DIAMETER | SECOND END INCHES MINIMUM 0.035 AND INCHES MAXIMUM 0.040 |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SOLID |
| AKUT | END FLANGE CONSTRUCTION | FIRST END SOLID |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AKUU | END CONNECTION DESIGN | FIRST END ELBOW |
| AWLS | CONNECTION TYPE | SECOND END PLAIN FACE FLANGE |
| AWLS | CONNECTION TYPE | FIRST END PLAIN FACE FLANGE |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 475.0 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 190.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 285.0 |
| CRFY | FLOW ANGLE | FIRST END DEGREES 90.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 108.0 |
| CRSM | VACUUM IN TORR | 20.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 18.000 |
| CTCJ | FLANGE STYLE | |
| FEAT | SPECIAL FEATURES | FERRULE,SWAGE,TUBE COUPLINGS ON BOTH ENDS, THREADED EXTERNAL 1 3/4-12UN-2A, SLOTTED, P/N W83051-20 |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |