NSN 5306-00-437-9514 · NIIN 004379514 · FSC 5306
NO DASHES 5306004379514
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.126 AND INCHES MAXIMUM 0.141 |
| FEAT | SPECIAL FEATURES | W/RETAINING ELEMENT ON SHANK |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 41.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 1.818 AND INCHES MAXIMUM 1.848 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.918 AND INCHES MAXIMUM 1.938 |
| AASK | HEAD STYLE | |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.086 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-B-83050 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.282 AND INCHES MAXIMUM 0.333 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.430 AND INCHES MAXIMUM 0.439 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2483 AND INCHES MAXIMUM 0.2492 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 63.0 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.500 AND INCHES MAXIMUM 1.516 |
| AAJD | THREAD CLASS | 3A |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC ALL TREATMENT RESPONSES QQ--416,TY 2,CL 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CMLP | THREAD QUANTITY PER INCH | 28 |
Supersedes
This item replaces cancelled NIIN 001810905. An older drawing citing one of those numbers resolves here.