NSN 5306-00-460-8545 · NIIN 004608545 · FSC 5306
NO DASHES 5306004608545
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| MATT | MATERIAL | LOCKING FEATURE STEEL COMP 630 OR STEEL COMP 440C |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | LOCKING FEATURE ASSN STD 1ST MATERIAL RESPONSE -AS 5643 OR FED SPEC 2ND MATERIAL RESPONSE QQ-S-763 |
| SFTT | SURFACE TREATMENT | FASTENER CADMIUM AND CHROMATE |
| SFTT | SURFACE TREATMENT | LOCKING FEATURE PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FASTENER FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2 CLASS 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | LOCKING FEATURE FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 63.0 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 95000 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.236 AND INCHES MAXIMUM 0.318 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.247 AND INCHES MAXIMUM 1.257 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.095 AND INCHES MAXIMUM 0.110 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.367 AND INCHES MAXIMUM 0.376 |
| AAUM | LOCKING FEATURE | GRIP RETAINER |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1894 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.080 |
| MATT | MATERIAL | FASTENER STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 OR STEEL COMP 6150 |
| AAJD | THREAD CLASS | 3A |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| CQFM | HARDNESS RATING | FASTENER ROCKWELL C MINIMUM 35.0 AND ROCKWELL C MAXIMUM 41.0 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 63.0 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.875 AND INCHES MAXIMUM 0.891 |