NSN 5306-00-323-3090 · NIIN 003233090 · FSC 5306
NO DASHES 5306003233090
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 41.0 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.492 AND INCHES MAXIMUM 0.502 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3108 AND INCHES MAXIMUM 0.3117 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 63.0 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.688 AND INCHES MAXIMUM 1.704 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 95000 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.157 AND INCHES MAXIMUM 0.172 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| AAJD | THREAD CLASS | 3A |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 63.0 |
| FEAT | SPECIAL FEATURES | RETAINING ELEMENT IN SHANK |
| MATT | MATERIAL | OVERALL STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 316L |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6049 OR MIL SPEC 4TH MATERIAL RESPONSE -IL-S-6098 OR MIL SPEC 5TH MATERIAL RESPONSE -IL-S-8503 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.310 AND INCHES MAXIMUM 0.377 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.165 AND INCHES MAXIMUM 2.185 |
| AASK | HEAD STYLE |