NSN 3020-00-971-4696 · NIIN 009714696 · FSC 3020
NO DASHES 3020009714696
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| AAQL | BODY STYLE | |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.375 |
| FEAT | SPECIAL FEATURES | SETSCREW CENTERED 0.109 IN.FROM END OF HUB |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 2024 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.218 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.187 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.020 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.234 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.198 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.343 |
| AJLA | TEETH QUANTITY | 36 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.593 |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 0.5615 AND INCHES MAXIMUM 0.5625 |
| ANTP | BORE STYLE | |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 40 |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.112 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END THREADED 1 |
| SFTT | SURFACE TREATMENT | OVERALL ANODIZE |
| STYL | STYLE DESIGNATOR | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 6,T351 |
Supersedes
This item replaces cancelled NIIN 009919011. An older drawing citing one of those numbers resolves here.