NSN 5305-01-193-6859 · NIIN 011936859 · FSC 5305
NO DASHES 5305011936859
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.308 AND INCHES MAXIMUM 0.375 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.693 AND INCHES MAXIMUM 0.740 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.339 AND INCHES MAXIMUM 0.381 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.385 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 50.0 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6487 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM OR CADMIUM OR CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD 1ST TREATMENT RESPONSE NAS672 AND MIL SPEC 2ND TREATMENT RESPONSE -IL-C-8837 TY2 CL2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Supersedes
This item replaces cancelled NIINs 000832135 · 010114040. An older drawing citing one of those numbers resolves here.