NSN 5305-01-191-3132 · NIIN 011913132 · FSC 5305
NO DASHES 5305011913132
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.308 AND INCHES MAXIMUM 0.375 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.006 AND INCHES MAXIMUM 1.053 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.339 AND INCHES MAXIMUM 0.381 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.678 AND INCHES MAXIMUM 0.698 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| FEAT | SPECIAL FEATURES | DRIVE RIBBED |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S6487 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM OR CADMIUM OR CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD 1ST TREATMENT RESPONSE NAS672 OR MIL SPEC 2ND TREATMENT RESPONSE -IL-C-8837,TY2,CL2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |