NSN 5955-00-703-7978 · NIIN 007037978 · FSC 5955
NO DASHES 5955007037978
In Stock
CRYSTAL UNIT,QUARTZ
Oscillators and Piezoelectric Crystals
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.005 TO 0.005 |
| CQYL | DRIVE LEVEL RATING | MILLIWATTS NOMINAL 10.0 AND MILLIWATTS MINIMUM 8.0 AND MILLIWATTS MAXIMUM 12.0 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.478 AND INCHES MAXIMUM 0.494 |
| AFGA | OPERATING TEMP RANGE | CELSIUS 0.0 TO 55.0 |
| ADUM | OVERALL THICKNESS | INCHES MAXIMUM 0.352 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.048 AND INCHES MAXIMUM 0.052 |
| AEHC | MODE OF OSCILLATION | FUNDAMENTAL |
| AEHD | CIRCUIT RESONANCE | SERIES RESONANCE |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | MAXIMUM 7.0 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.023 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.223 AND INCHES MAXIMUM 0.248 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 0.757 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.775 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.725 |
| ADPR | BODY THICKNESS | INCHES MAXIMUM 0.320 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 18876-10676193 |
| AEHN | OPERABLE TEMP RANGE | CELSIUS 0.0 TO 55.0 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | NOMINAL 24.0 |
| STYL | STYLE DESIGNATOR | |
| AEHM | CONTROLLED REFERENCE TEMP | CELSIUS 25.0 |
| AEHG | SPECIFIED FREQUENCY | MEGAHERTZ 7.963 |
| AEHK | FREQUENCY TOLERANCE AT REFERENCE TEMP IN PERCENT | -0.001 TO 0.001 |
| AEHL | FREQUENCY STABILITY IN PERCENT | -0.002 TO 0.002 |