NSN 5905-01-016-2367 · NIIN 010162367 · FSC 5905
NO DASHES 5905010162367
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Application: MISSILE, AIR-TO-AIR, SPARROW (AIM-7); SONAR SETS, AN/BQS-14A/15, HELICOPTER, CARRIER BASED ASW, SH-60F; SONAR SIGNAL PROCESSING SYS, AN/SQQ-28(V); MISSILE, AIR-TO-AIR, PHOENIX (AIM-54); DEEP SUBMERGENCE SYSTEMS PROGRAM (DSSP);AIRCRAFT, (AC-130H, MC-130H, EC-130E, HC-130); SONAR ACOUSTIC MISCELLANEO
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.100 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 0.555 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.172 |
| ABKW | OVERALL HEIGHT | INCHES MAXIMUM 0.715 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.205 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.073 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.078 |
| ABXF | SHAFT LENGTH | INCHES MAXIMUM 0.045 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.500 |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.205 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.515 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES NOMINAL 0.200 |
| AGAV | END ITEM IDENTIFICATION | MISSILE, AIR-TO-AIR, SPARROW (AIM-7); SONAR SETS, AN/BQS-14A/15, HELICOPTER, CARRIER BASED ASW, SH-60F; SONAR SIGNAL PROCESSING SYS, AN/SQQ-28(V); MISSILE, AIR-TO-AIR, PHOENIX (AIM-54); DEEP SUBMERGENCE SYSTEMS PROGRAM (DSSP);AIRCRAFT, (AC-130H, MC-130H, EC-130E, HC-130); SONAR ACOUSTIC MISCELLANEO |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES NOMINAL 0.520 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) AND TERMINAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 20.0 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES NOMINAL 0.100 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED LOWER ADJACENT SIDE SINGLE ROW |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -50.0 TO 50.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.75 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| FEAT | SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-39015 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-39015 TO 2 |
Supersedes
This item replaces cancelled NIIN 010572650. An older drawing citing one of those numbers resolves here.