NSN 5905-00-089-6907 · NIIN 000896907 · FSC 5905
NO DASHES 5905000896907
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
42 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 1.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS TERMINAL BASE LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | ALL SECTIONS 1 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | OHMS ALL SECTIONS -5.0 TO 5.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 1ST SECTION 6250.0 AND 2ND SECTION 4375.0 AND 3RD SECTION 4375.0 AND 4TH SECTION 17500.0 AND 5TH SECTION 25000.0 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | ALL SECTIONS -20.0 TO 20.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 90.0 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 06481-910017 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 20 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 0.7750 |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 180.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 1.00 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.90 |
| AEFY | SHAFT END PLAY | INCHES 0.002 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | 1ST SECTION -0.50 TO 0.50 AND 2ND SECTION -0.55 TO 0.55 AND 3RD SECTION -0.55 TO 0.55 AND 4TH SECTION -0.30 TO 0.30 AND 5TH SECTION -0.50 TO 0.50 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 125.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| AAPN | SECTION QUANTITY | 5 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.7490 AND INCHES MAXIMUM 0.7590 |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 2.593 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.748 AND INCHES MAXIMUM 0.755 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0570 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 0.775 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.1245 AND INCHES MAXIMUM 0.1247 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.375 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 2.593 |
| BYDT | BEARING TYPE | SHAFT BALL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 12.5 AND KILOHMS 2ND SECTION 8.75 AND KILOHMS 3RD SECTION 8.75 AND KILOHMS 4TH SECTION 35.0 AND KILOHMS 5TH SECTION 50.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.001 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.001 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
Supersedes
This item replaces cancelled NIINs 009615915 · 009552126. An older drawing citing one of those numbers resolves here.