NSN 5905-00-588-2236 · NIIN 005882236 · FSC 5905
NO DASHES 5905005882236
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.187 |
| AEFZ | SHAFT RUNOUT | INCHES 0.002 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 105.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 3 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.06200 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 0.750 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.06200 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 0.875 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.125 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.438 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.687 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD TER-INAL SURFACE |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | GOLD GRAINS, TROY 0.005 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.002 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.75 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 0.87500 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.06200 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.00200 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 14.000 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.10 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.09 |
| AEFY | SHAFT END PLAY | INCHES 0.00500 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 353.0 |
| PRMT | PRECIOUS MATERIAL | GOLD |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -1.00 TO 1.00 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| AEGA | LATERAL RUNOUT | INCHES 0.002 |
| BYDT | BEARING TYPE | SHAFT BALL |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.74950 AND INCHES MAXIMUM 0.75000 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |