NSN 4720-00-809-6913 · NIIN 008096913 · FSC 4720
NO DASHES 4720008096913
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| THSD | THREAD SERIES DESIGNATOR | SECOND END UNF |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNF |
| CRXX | MEASURING METHOD AND LENGTH | INCHES MINIMUM OVERALL 23.875 AND INCHES MAXIMUM OVERALL 24.125 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 2B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.375 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 250.0 |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER CORRUGATED STEEL |
| AKUU | END CONNECTION DESIGN | SECOND END STRAIGHT |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL PIPE |
| AWLS | CONNECTION TYPE | SECOND END THREADED INTERNAL TUBE |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQRB | SEAT ANGLE | SECOND END DEGREES 42.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 500.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | FUEL RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT AND OZONE RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 0.562 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 250.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 1000.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.625 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 3.000 |
| ADJS | EXTERIOR COLOR | BLACK |
| AHNC | CONNECTION STYLE | |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.625 |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER |