NSN 3040-01-185-5385 · NIIN 011855385 · FSC 3040
NO DASHES 3040011855385
In Stock
SHAFT,STRAIGHT
Miscellaneous Power Transmission Equipment
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| AAHW | SECOND END GROOVE WIDTH | INCHES NOMINAL 0.0730 |
| AAHX | SECOND END GROOVE DIAMETER | INCHES MINIMUM 0.7490 AND INCHES MAXIMUM 0.7500 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 7.125 |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 1.2495 AND INCHES MAXIMUM 1.2500 |
| AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | INCHES NOMINAL 2.094 |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | INCHES NOMINAL 0.437 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 1.2495 AND INCHES MAXIMUM 1.2500 |
| AMGA | SECOND END SPLINE LENGTH | INCHES MINIMUM 0.7490 AND INCHES MAXIMUM 0.7500 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES MINIMUM 1.0230 AND INCHES MAXIMUM 1.0800 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES MINIMUM 1.2495 AND INCHES MAXIMUM 1.2500 |
| BDSR | SECOND END SPLINE QUANTITY | 10 |
| CSYM | SURFACE FINISH | MICROINCHES 16.0 |
| FEAT | SPECIAL FEATURES | SECOND END HAS PARIAL BORE WITH UNTHREADED 0.156 INCH DIAMETER LOCATED ON ONE SIDE |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-S-624 |