NSN 4320-00-987-7484 · NIIN 009877484 · FSC 4320
NO DASHES 4320009877484
In Stock
MOTOR,HYDRAULIC
Power and Hand Pumps
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ARQA | SHAFT PROTRUSION LENGTH | INCHES NOMINAL 2.000 |
| AJAB | DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.167 |
| ABSA | SPLINE QUANTITY | 12 |
| AECS | BOLT HOLE QUANTITY | 8 |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| AAPL | TORQUE LOAD RATING | INCH-POUNDS 117.3 |
| AAUH | SPLINE MINOR DIAMETER | INCHES MINIMUM 1.049 AND INCHES MAXIMUM 1.062 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES MINIMUM 1.247 AND INCHES MAXIMUM 1.248 |
| AAXX | MOUNTING TYPE | FLANGE |
| SFTT | SURFACE TREATMENT | HOUSING ENAMEL |
| AXFP | DISPLACEMENT TYPE | CONSTANT |
| ASAP | SPLINE PITCH | 12/24 |
| ASMM | CONNECTION QUANTITY | 2 |
| AWLS | CONNECTION TYPE | INLET |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE AND COUNTERCLOCKWISE |
| AXFB | MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 2000PSI AT MINUS 65 DEG F TO PLUS170 DEG F |
| AXFC | CONNECTION DESIGN | FLANGED |
| AXFH | SPLINE LENGTH | INCHES NOMINAL 1.875 |
| AXFD | BOLT HOLE THREAD SIZE | 0.500-13 |
| AZFF | BOLT HOLE SPACING | 1-13/32 IN. BY 2-3/4 IN. 2 PLACES |