NSN 5306-00-528-4945 · NIIN 005284945 · FSC 5306
NO DASHES 5306005284945
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Application: AIRCRAFT,EAGLE F-15
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6487 |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 08524-B-17019 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.625 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.990 AND INCHES MAXIMUM 2.010 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT,EAGLE F-15 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.928 AND INCHES MAXIMUM 0.940 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.751 AND INCHES MAXIMUM 0.818 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.761 AND INCHES MAXIMUM 2.808 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.340 AND INCHES MAXIMUM 0.360 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.081 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 1.635 AND INCHES MAXIMUM 1.692 |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.6235 AND INCHES MAXIMUM 0.6240 |