NSN 5306-00-541-9490 · NIIN 005419490 · FSC 5306
NO DASHES 5306005419490
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.553 AND INCHES MAXIMUM 0.564 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.557 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 1.563 AND INCHES MAXIMUM 1.620 |
| AASK | HEAD STYLE | |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.111 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.200 AND INCHES MAXIMUM 0.220 |
| AAJD | THREAD CLASS | 3A |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 08524-B-17019 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6487 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.178 AND INCHES MAXIMUM 1.198 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3740 AND INCHES MAXIMUM 0.3745 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.688 AND INCHES MAXIMUM 1.735 |