NSN 4320-01-054-0302 · NIIN 010540302 · FSC 4320
NO DASHES 4320010540302
In Stock
MOTOR,HYDRAULIC
Power and Hand Pumps
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAPL | TORQUE LOAD RATING | INCH-POUNDS 59.9 |
| AAST | KEY LENGTH | INCHES NOMINAL 1.250 |
| AAXX | MOUNTING TYPE | FLANGE |
| ABSF | KEY WIDTH | INCHES NOMINAL 0.312 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.688 |
| ABUJ | THREAD SIZE | 1.625-12 AND 0.750-16 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 1.250 |
| AEQC | OPERATING SPEED AT RATED CAPACITY IN RPM | 1800.0 |
| AFFL | MOUNTING BOLT CIRCLE DIAMETER | INCHES NOMINAL 7.125 |
| AJAB | DRIVE SHAFT TYPE | KEYED |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UN AND UNF |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE AND COUNTERCLOCKWISE |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | PRESSURE COMPENSATOR 1 |
| APJC | THREAD LOCATION | OVERALL INTERNAL |
| ARQA | SHAFT PROTRUSION LENGTH | INCHES NOMINAL 1.880 |
| ASMM | CONNECTION QUANTITY | 2 AND 1 |
| AWLS | CONNECTION TYPE | INLET AND OUTLET AND DRAIN |
| AXFB | MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 2500PSI AT UNKNOWN DEGREE F |
| AXFC | CONNECTION DESIGN | THREADED |
| AXFE | KEY HEIGHT | INCHES NOMINAL 0.312 |
| AXFP | DISPLACEMENT TYPE | VARIABLE |
| AXFQ | CONSTANT DISPLACEMENT PER REVOLUTION | CUBIC INCHES 3.760 |
| FEAT | SPECIAL FEATURES | 12.88IN.L,8.88IN.W,7.44IN.H; END PORT POSITIONS; DRAIN ON BOTTOM |
Supersedes
This item replaces cancelled NIIN 010452652. An older drawing citing one of those numbers resolves here.