NSN 6105-00-806-8614 · NIIN 008068614 · FSC 6105
NO DASHES 6105008068614
In Stock
MOTOR-TACHOMETER GENERATOR
Motors, Electrical
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BKPC | CALIBRATION VOLTAGE OUTPUT TYPE IN VOLTS | AC 0.5 |
| AYHE | EXCITOR TYPE | SEPARATELY EXCITED |
| BKPH | TORQUE RATING AND TYPE | INCH-OUNCES STALLED 0.3 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A4 |
| FREQ | FREQUENCY IN HERTZ | 400.0 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| BKPS | CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS | AC 26.0 |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CNXS | POWER RATING | INPUT WATTS 1.700 |
| CQRR | TAPER | SINGLE END PER FOOT IN INCHES 0.687 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.233 |
| CWDY | TEMP RATING | OPERATING CELSIUS -54.0 AND OPERATING CELSIUS 71.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 10000.0 |
| BFLQ | CALIBRATION SPEED IN RPM | 1000.0 |
| BFMF | COOLING METHOD | NONVENTILATED |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | CLAMP COLLAR 1 |
| AAJU | OVERALL LENGTH | INCHES 2.376 |
| AAJV | OVERALL WIDTH | INCHES 0.937 |
| ABND | TAPER LENGTH | SINGLE END INCHES NOMINAL 0.2380 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.1650 |
| ACDC | CURRENT TYPE | INPUT AC |
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | FEET 50000.0 |
| ANPZ | ENCLOSURE FEATURE | OPEN PROTECTED |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 26.0 |
| FAAZ | PHASE | INPUT SINGLE |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 11 |
Supersedes
This item replaces cancelled NIINs 007814954 · 008001625. An older drawing citing one of those numbers resolves here.