NSN 5910-00-195-4298 · NIIN 001954298 · FSC 5910
NO DASHES 5910001954298
In Stock
CAPACITOR,FIXED,CERAMIC DIELECTR
Capacitors
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRTP | TOLERANCE RANGE PER SECTION | PERCENT SINGLE SECTION -5.00 TO 5.00 |
| CRHD | TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -30.0 TO 30.0 |
| CWQF | QUALITY FACTOR AT REFERENCE TEMP | 1000.000 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| MATT | MATERIAL | CASE PLASTIC |
| TTQY | TERMINAL TYPE AND QUANTITY | UNINSULATED WIRE LEAD 2 |
| AAQL | BODY STYLE | |
| CQBQ | CAPACITANCE VALUE PER SECTION | PICOFARADS SINGLE SECTION 33.000 |
| CQLZ | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION 0.0 |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | MEGOHMS 10000.0 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 85.0 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | DC SINGLE SECTION 1000.0 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 0.350 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.156 |
| AEBS | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER | INCHES NOMINAL 0.250 |
| AEBT | TERMINAL DIAMETER | INCHES NOMINAL 0.025 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 1.250 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
Supersedes
This item replaces cancelled NIINs 001959475 · 010971718. An older drawing citing one of those numbers resolves here.