NSN 5990-00-727-0723 · NIIN 007270723 · FSC 5990
NO DASHES 5990007270723
In Stock
SYNCHRO,RECEIVER
Synchros and Resolvers
Application: AIRCRAFT, T-37; AIRCRAFT, T-38; TA-4J AIRCRAFT
Technical characteristics
49 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0330 AND INCHES MAXIMUM 0.0430 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0010 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 3.0 |
| FEAT | SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | MILLIMETER-MILLIGRAMS MAXIMUM 2700.0 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.5340 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.9360 AND INCHES MAXIMUM 0.9370 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.8350 AND INCHES MAXIMUM 0.8450 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0630 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0880 AND INCHES MAXIMUM 0.0900 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.2530 AND INCHES MAXIMUM 0.2930 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2410 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.8118 AND INCHES MAXIMUM 0.8123 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 780.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 725.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 7.70 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 1100.00 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | MILLIMETER-MILLIGRAMS NOMINAL 3000.0 |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0010 |
| AJWH | SHAFT END PLAY | INCHES MINIMUM 0.0020 AND INCHES MAXIMUM 0.0050 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 8.500 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | MILLIMETER-MILLIGRAMS MAXIMUM 5400.0 |
| AAQL | BODY STYLE | |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 325.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, T-37; AIRCRAFT, T-38; TA-4J AIRCRAFT |
| AJSL | BODY SIZE | 10 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 33.0 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 3410.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MINIMUM 0.0250 AND INCHES MAXIMUM 0.0350 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 30.50 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MINIMUM 0.0150 AND INCHES MAXIMUM 0.0250 |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MINIMUM 0.6750 AND INCHES MAXIMUM 0.6810 |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.103 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES MAXIMUM 0.0500 |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | GRAMS 40.0 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 500.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 7.30 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
Supersedes
This item replaces cancelled NIIN 000815369. An older drawing citing one of those numbers resolves here.