ATLASAir Supply

321-252-9430Mon–Fri · 8a–6p ET
Quote0 Request a Quote →
Home / MS parts / NSN 2920-00-640-7485
NSN 2920-00-640-7485  ·  NIIN 006407485  ·  FSC 2920
NO DASHES 2920006407485
In Stock

GENERATOR,ENGINE ACCESSORY

Engine Electrical System Components, Nonaircraft

Technical characteristics

31 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

MRCRequirementValue
BCMBANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG206.0
AHZVSUBMERSIBILITYNONSUBMERSIBLE
BCLYDISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTERINCHES NOMINAL 3.062
AFYSKEYWAY LENGTHINCHES NOMINAL 0.625
ELECVOLTAGE IN VOLTS12.0
ADZCENVIRONMENTAL PROTECTIONCORROSION RESISTANT
BCMDDISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKETINCHES MINIMUM 6.118 AND INCHES MAXIMUM 6.136
BCLZDISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTERINCHES NOMINAL 3.062
BCGSSHAFT DRIVE END STYLE
BZRRTHREAD SERIESUNF
AKCTSHAFT ROTATION DIRECTIONCLOCKWISE
ANTXDISTANCE FROM END TO KEYWAY CENTERINCHES NOMINAL 1.344
AWDPTHREAD DIAMETERINCHES NOMINAL 0.500
BCGFMAXIMUM OUTPUT CURRENT RATING IN AMPS11.0
CMLNMOUNTING HOLE THREAD CLASS2B
ABRRKEYWAY WIDTHINCHES NOMINAL 0.125
BCMCANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG154.0
ADERMOUNTING STYLE
ABFFFURNISHED ITEMSCOTTER PIN HOLE
ABPTSECOND STEP DIAMETERINCHES MINIMUM 0.668 AND INCHES MAXIMUM 0.669
AASATHREAD LENGTHINCHES NOMINAL 0.719
CFHLTHREAD CLASS2A
CMLKMOUNTING HOLE THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
CMLLMOUNTING HOLE THREAD DIAMETERINCHES NOMINAL 0.312
CMLMMOUNTING HOLE THREAD QUANTITY PER INCH20
BCGNGROUNDING METHODEXTERNAL
BCMFDISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKETINCHES MINIMUM 6.830 AND INCHES MAXIMUM 6.832
BCMHBOTTOM MOUNTING HOLE DIAMETERINCHES MINIMUM 0.316 AND INCHES MAXIMUM 0.324
CMLPTHREAD QUANTITY PER INCH20
ABVAUNTHREADED PORTION LENGTHINCHES NOMINAL 1.250
AAJFTHREAD DIRECTIONRIGHT-HAND