NSN 5305-01-312-0701 · NIIN 013120701 · FSC 5305
NO DASHES 5305013120701
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.443 AND INCHES MAXIMUM 0.510 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.265 AND INCHES MAXIMUM 1.312 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.4750 AND INCHES MAXIMUM 0.5066 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.0713 AND INCHES MAXIMUM 0.0733 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2485 AND INCHES MAXIMUM 0.2495 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.802 AND INCHES MAXIMUM 0.822 |
| CBBL | FEATURES PROVIDED | DRY FILM LUBRICANT AND O RING AND CETYL ALCOHOL LUBRICANT |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| FEAT | SPECIAL FEATURES | FLUORSILICONE RUBBER O-RING,PER MIL-R-25988 TY1,CL 1,GR 70; LUBRICANTS APPLIED ON SHANK AND THREADS |
| MATT | MATERIAL | FASTENER TITANIUM ALLOY UNS R56400 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FASTENER ASSN STD SINGLE MATERIAL RESPONSE A-S 4967 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |