NSN 2920-00-073-2128 · NIIN 000732128 · FSC 2920
NO DASHES 2920000732128
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AFYS | KEYWAY LENGTH | INCHES NOMINAL 0.625 |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| ADER | MOUNTING STYLE | |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| ELEC | VOLTAGE IN VOLTS | 12.0 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CFHL | THREAD CLASS | 2A |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.312 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.444 |
| ABPT | SECOND STEP DIAMETER | INCHES MINIMUM 0.668 AND INCHES MAXIMUM 0.669 |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.125 |
| ABVA | UNTHREADED PORTION LENGTH | INCHES NOMINAL 0.795 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES NOMINAL 7.127 |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES NOMINAL 0.937 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.320 |
| BZRR | THREAD SERIES | UNF |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 193.0 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 3.062 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 0.0 |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 3.062 |
| BCGS | SHAFT DRIVE END STYLE | |
| BCGM | RECTIFIER LOCATION | SEPARATE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | INCHES NOMINAL 0.840 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.625 |