NSN 2920-00-529-9916 · NIIN 005299916 · FSC 2920
NO DASHES 2920005299916
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | INCHES NOMINAL 0.900 |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| BCGS | SHAFT DRIVE END STYLE | |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 193.0 |
| BCGN | GROUNDING METHOD | EXTERNAL |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 20.0 |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 980 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.625 |
| AXHX | GROUND POLARITY TYPE | NEGATIVE OR POSITIVE |
| ABPT | SECOND STEP DIAMETER | INCHES MINIMUM 0.668 AND INCHES MAXIMUM 0.669 |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.125 |
| ABVA | UNTHREADED PORTION LENGTH | INCHES MINIMUM 0.750 AND INCHES MAXIMUM 0.840 |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.312 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| ELEC | VOLTAGE IN VOLTS | 12.0 |
| FEAT | SPECIAL FEATURES | 3 THREADED POST TERMINALS 0.190-32 THD SIZE |
| BZRR | THREAD SERIES | UN |
| CFHL | THREAD CLASS | 3A |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 7.918 AND INCHES MAXIMUM 7.936 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.316 AND INCHES MAXIMUM 0.324 |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1560 |
| ADER | MOUNTING STYLE | |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT |
| AFYS | KEYWAY LENGTH | INCHES NOMINAL 0.625 |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 3.062 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 3.060 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.490 |
| ABFF | FURNISHED ITEMS | RADIO INTERFERENCE SHIELDING |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 159.0 |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 7200 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 7.118 AND INCHES MAXIMUM 7.136 |