NSN 2920-01-149-8606 · NIIN 011498606 · FSC 2920
NO DASHES 2920011498606
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASA | THREAD LENGTH | MILLIMETERS NOMINAL 25.5 |
| ABVA | UNTHREADED PORTION LENGTH | MILLIMETERS NOMINAL 25.4 |
| ADER | MOUNTING STYLE | |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| AXHX | GROUND POLARITY TYPE | POSITIVE |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 100 |
| BCGM | RECTIFIER LOCATION | INTEGRAL |
| BCGN | GROUNDING METHOD | INTERNAL |
| BCGS | SHAFT DRIVE END STYLE | |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | MILLIMETERS NOMINAL 101.6 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | MILLIMETERS NOMINAL 101.6 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 0.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 180.0 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | MILLIMETERS NOMINAL 66.8 |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | MILLIMETERS NOMINAL 107.7 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | MILLIMETERS NOMINAL 10.5 |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | SI |
| CMLL | MOUNTING HOLE THREAD DIAMETER | MILLIMETERS NOMINAL 25.4 |
| ELEC | VOLTAGE IN VOLTS | 12.0 |