ATLASAir Supply

321-252-9430Mon–Fri · 8a–6p ET
Quote0 Request a Quote →
Home / MS parts / NSN 2920-00-371-5085
NSN 2920-00-371-5085  ·  NIIN 003715085  ·  FSC 2920
NO DASHES 2920003715085
In Stock

GENERATOR,ENGINE ACCESSORY

Engine Electrical System Components, Nonaircraft

Technical characteristics

31 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

MRCRequirementValue
CMLLMOUNTING HOLE THREAD DIAMETERINCHES NOMINAL 0.312
BCLYDISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTERINCHES NOMINAL 3.875
CFHLTHREAD CLASS2A
ABFFFURNISHED ITEMSCOTTER PIN HOLE
CMLNMOUNTING HOLE THREAD CLASS2B
CMLPTHREAD QUANTITY PER INCH20
CMLKMOUNTING HOLE THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
ABRRKEYWAY WIDTHINCHES NOMINAL 0.125
ABVAUNTHREADED PORTION LENGTHINCHES MINIMUM 1.281 AND INCHES MAXIMUM 1.344
ADERMOUNTING STYLE
AFYSKEYWAY LENGTHINCHES NOMINAL 0.625
AHZVSUBMERSIBILITYNONSUBMERSIBLE
AKCTSHAFT ROTATION DIRECTIONCLOCKWISE
ANTXDISTANCE FROM END TO KEYWAY CENTERINCHES NOMINAL 1.375
AWDPTHREAD DIAMETERINCHES NOMINAL 0.500
BCGDARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT1550
BCLZDISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTERINCHES NOMINAL 3.500
ABPTSECOND STEP DIAMETERINCHES MINIMUM 0.668 AND INCHES MAXIMUM 0.669
BCMBANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG193.0
BCMCANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG159.0
BCMDDISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKETINCHES MINIMUM 7.243 AND INCHES MAXIMUM 7.257
BCMFDISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKETINCHES MINIMUM 8.243 AND INCHES MAXIMUM 8.257
CMLMMOUNTING HOLE THREAD QUANTITY PER INCH18
BZRRTHREAD SERIESUNF
BCGNGROUNDING METHODEXTERNAL
ELECVOLTAGE IN VOLTS12.0
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTHINCHES NOMINAL 0.719
BCGFMAXIMUM OUTPUT CURRENT RATING IN AMPS26.0
BCGSSHAFT DRIVE END STYLE
BCMHBOTTOM MOUNTING HOLE DIAMETERINCHES NOMINAL 0.453