NSN 2920-00-371-5087 · NIIN 003715087 · FSC 2920
NO DASHES 2920003715087
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABFF | FURNISHED ITEMS | WOODRUFF KEY |
| BCGS | SHAFT DRIVE END STYLE | |
| BZRR | THREAD SERIES | UNF |
| BCGN | GROUNDING METHOD | EXTERNAL |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.720 |
| ABPT | SECOND STEP DIAMETER | INCHES MINIMUM 0.6684 AND INCHES MAXIMUM 0.699 |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.125 |
| ABVA | UNTHREADED PORTION LENGTH | INCHES MINIMUM 1.280 AND INCHES MAXIMUM 1.340 |
| ADER | MOUNTING STYLE | |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT |
| CFHL | THREAD CLASS | 2A |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | INCHES NOMINAL 1.380 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.500 |
| AXHX | GROUND POLARITY TYPE | NEGATIVE OR POSITIVE |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 193.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 159.0 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 3.500 |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES NOMINAL 8.250 |
| BCMG | TOP MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.453 |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1625 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 10.0 |
| ZZZV | FSC APPLICATION DATA | ENGINE ELECTRICAL SYSTEM,NONAIRCRAFT |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ELEC | VOLTAGE IN VOLTS | 24.0 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.453 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 7.243 AND INCHES MAXIMUM 7.257 |
| AFYS | KEYWAY LENGTH | INCHES NOMINAL 0.625 |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 3.875 |
Supersedes
This item replaces cancelled NIIN 005931531. An older drawing citing one of those numbers resolves here.