NSN 2920-00-995-1534 · NIIN 009951534 · FSC 2920
NO DASHES 2920009951534
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPT | SECOND STEP DIAMETER | INCHES MINIMUM 0.6684 AND INCHES MAXIMUM 0.669 |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.460 AND INCHES MAXIMUM 0.520 |
| ABFF | FURNISHED ITEMS | WOODRUFF KEY |
| BCGS | SHAFT DRIVE END STYLE | |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 3.500 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 3.875 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 13.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 159.0 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 7.243 AND INCHES MAXIMUM 7.257 |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1900 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 18.0 |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 8.123 AND INCHES MAXIMUM 8.137 |
| BCMG | TOP MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.453 |
| AAJE | THREAD PITCH DIAMETERS | INCHES 0.6324 TO 0.6365 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| ELEC | VOLTAGE IN VOLTS | 24.0 |
| ZZZV | FSC APPLICATION DATA | ENGINE ELECTRICAL SYSTEM,NONAIRCRAFT |
| BZRR | THREAD SERIES | UNS |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.375 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| AXHX | GROUND POLARITY TYPE | NEGATIVE OR POSITIVE |
| AFYS | KEYWAY LENGTH | INCHES NOMINAL 0.625 |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | INCHES NOMINAL 1.140 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.669 |
| BCGN | GROUNDING METHOD | EXTERNAL |
| ABVA | UNTHREADED PORTION LENGTH | INCHES MINIMUM 1.280 AND INCHES MAXIMUM 1.340 |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.125 |