NSN 5905-00-079-8634 · NIIN 000798634 · FSC 5905
NO DASHES 5905000798634
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | SINGLE SECTION 1250.0 |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -400.0 TO 400.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE CONFORMITY |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| BYDT | BEARING TYPE | SHAFT BALL |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CBME | CUBIC MEASURE | CUBIC INCHES 3.141 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 2.5 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRJS | FIXED TAP QUANTITY PER SECTION | SINGLE SECTION 1 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 1.8740 AND INCHES MAXIMUM 1.8750 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0630 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION EQUATION |
| FEAT | SPECIAL FEATURES | COUPLING ATTACHED TO SHAFT |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 18876-13059259 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 4 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AEDX | SHAFT STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.500 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 1.874 AND INCHES MAXIMUM 1.875 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0550 AND INCHES MAXIMUM 0.0850 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 2.000 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.249 AND INCHES MAXIMUM 0.250 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.437 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.000 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 2.218 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 2.0000 |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.0880 AND INCHES MAXIMUM 0.0980 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |