NSN 5970-00-904-2492 · NIIN 009042492 · FSC 5970
NO DASHES 5970009042492
In Stock
INSULATION SLEEVING,ELECTRICAL,S
Electrical Insulators and Insulating Materials
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABJH | TEMP RATING | CELSIUS -55.0 |
| AGAK | MAIN BODY LARGE END INSIDE DIAMETER | AS SUPPLIED INCHES MINIMUM 1.120 |
| AFZP | LARGE END WALL THICKNESS OF MAIN BODY | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.060 |
| FLEX | FLEXIBILITY | SEMIRIGID |
| HGTH | HEIGHT | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 1.050 |
| HUES | COLOR | BLACK |
| MATT | MATERIAL | LOCATION NOT OTHERWISE SPECIFIED PLASTIC POLYOLEFIN |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | LOCATION NOT OTHERWISE SPECIFIED MFR REF SINGLE MATERIAL RESPONSE RT-301, RAYCHE- COR OR MFR REF SINGLE MATERIAL RESPONSE --262,ELECTRONIZED CHE-ICALS COR |
| STYL | STYLE DESIGNATOR | |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FLAME RESISTANT AND MILDEW RESISTANT AND SOLVENT RESISTANT AND WATER RESISTANT |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AFZS | DISTANCE FROM CENTERLINE OF SMALL END TO EDGE OF LARGE END | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.730 |
| AGAJ | MAIN BODY SMALL END INSIDE DIAMETER | AFTER UNRESTRICTED RECOVERY INCHES MAXIMUM 0.250 |
| AGAP | ANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG | AFTER UNRESTRICTED RECOVERY NOMINAL 90.0 |
| AGAP | ANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG | AS SUPPLIED NOMINAL 180.0 |
| AFZQ | SMALL END WALL THICKNESS OF MAIN BODY | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.060 |
| AFZR | DISTANCE FROM INTERSECTING CENTERLINES TO EDGE OF SMALL END | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 1.060 |
| AGAM | DISTANCE FROM TOP OF SHOULDER TO SMALL END OF MAIN BODY | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.280 |
| UKBG | DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS | VOLTS PER MIL /0.001 INCH/ 200.0 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 1500 |
| AGAJ | MAIN BODY SMALL END INSIDE DIAMETER | AS SUPPLIED INCHES MINIMUM 1.120 |
| AGAK | MAIN BODY LARGE END INSIDE DIAMETER | AFTER UNRESTRICTED RECOVERY INCHES MAXIMUM 0.560 |
Supersedes
This item replaces cancelled NIINs 001277171 · 004566093. An older drawing citing one of those numbers resolves here.