NSN 5306-01-131-2907 · NIIN 011312907 · FSC 5306
NO DASHES 5306011312907
In Stock
BOLT,ASSEMBLED WASHER
Bolts
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.313 AND INCHES MAXIMUM 0.363 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.761 AND INCHES MAXIMUM 1.791 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.110 AND INCHES MAXIMUM 0.125 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.367 AND INCHES MAXIMUM 0.376 |
| AAVW | WASHER QUANTITY | 1 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CSPG | PRIMARY WASHER OUTSIDE DIAMETER | INCHES MINIMUM 0.433 AND INCHES MAXIMUM 0.458 |
| CTHW | PRIMARY WASHER STYLE | |
| CTJJ | PRIMARY WASHER MATERIAL THICKNESS | INCHES MINIMUM 0.028 AND INCHES MAXIMUM 0.036 |
| MATT | MATERIAL | PRIMARY WASHER ALUMINUM ALLOY 2024 |
| MATT | MATERIAL | FASTENER TITANIUM ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FASTENER ASSN STD SINGLE MATERIAL RESPONSE NAS621 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | PRIMARY WASHER FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 5,T3 OR T4 |
| SFTT | SURFACE TREATMENT | PRIMARY WASHER ANODIZE OR CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | PRIMARY WASHER MIL SPEC 2ND TREATMENT RESPONSE -IL-C-5541 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |