NSN 5905-01-289-4167 · NIIN 012894167 · FSC 5905
NO DASHES 5905012894167
In Stock
RESISTOR,FIXED,WIRE WOUND
Resistor
Application: INTERFACEUNIT
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -10.0 TO 10.0 |
| AAPP | ELECTRICAL RESISTANCE | KILOHMS 4.810 |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -0.100 TO 0.100 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 100.0 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 1.875 AND INCHES MAXIMUM 2.125 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 0.110 AND INCHES MAXIMUM 0.140 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.218 AND INCHES MAXIMUM 0.282 |
| AEFB | POWER DISSIPATION RATING IN WATTS | FREE AIR 0.125 |
| AGAV | END ITEM IDENTIFICATION | INTERFACEUNIT |
| AKNA | INCLOSURE TYPE | HERMETICALLY SEALED |
| CBME | CUBIC MEASURE | CUBIC INCHES 0.004 |
| CSCF | TERMINAL TYPE | WIRE LEAD |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 27914-11117 |