NSN 2920-00-009-2162 · NIIN 000092162 · FSC 2920
NO DASHES 2920000092162
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BCGS | SHAFT DRIVE END STYLE | |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 3.900 |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 5000 |
| BZRR | THREAD SERIES | UNF |
| ELEC | VOLTAGE IN VOLTS | 12.0 |
| ADER | MOUNTING STYLE | |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.625 |
| AXHX | GROUND POLARITY TYPE | POSITIVE |
| BCGM | RECTIFIER LOCATION | INTEGRAL |
| CFHL | THREAD CLASS | 2A |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNS |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.500 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 12 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 3.940 AND INCHES MAXIMUM 4.010 |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 5.290 AND INCHES MAXIMUM 5.360 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.514 AND INCHES MAXIMUM 0.524 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABFF | FURNISHED ITEMS | COOLING FAN AND LOCKWASHER AND NUT |
| ABPT | SECOND STEP DIAMETER | INCHES NOMINAL 0.874 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 180.0 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 0.0 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 3.900 |