NSN 2920-00-562-6149 · NIIN 005626149 · FSC 2920
NO DASHES 2920005626149
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BZRR | THREAD SERIES | UNF |
| CFHL | THREAD CLASS | 2A |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 5.370 AND INCHES MAXIMUM 5.380 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.844 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.874 |
| BCMG | TOP MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.531 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.627 AND INCHES MAXIMUM 0.629 |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.625 |
| AXFH | SPLINE LENGTH | INCHES NOMINAL 2.000 |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 900 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 4.875 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 170.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 190.0 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES NOMINAL 4.250 |
| BCGN | GROUNDING METHOD | INTERNAL |
| BCGS | SHAFT DRIVE END STYLE | |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 4.500 |
| ELEC | VOLTAGE IN VOLTS | 12.0 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 55.0 |
| AAUK | SPLINE WIDTH | INCHES MINIMUM 0.216 AND INCHES MAXIMUM 0.217 |
| ABSA | SPLINE QUANTITY | 6 |
| ADER | MOUNTING STYLE | |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 3600 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 580 |