NSN 2920-00-302-6499 · NIIN 003026499 · FSC 2920
NO DASHES 2920003026499
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 40.0 |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.680 |
| AAUK | SPLINE WIDTH | INCHES MINIMUM 0.097 AND INCHES MAXIMUM 0.0982 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 180.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 160.0 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 7.521 AND INCHES MAXIMUM 7.538 |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 8.381 AND INCHES MAXIMUM 8.598 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.525 AND INCHES MAXIMUM 0.537 |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 1490 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ZZZV | FSC APPLICATION DATA | ENGINE ELECTRICAL SYSTEM,NONAIRCRAFT |
| AXHX | GROUND POLARITY TYPE | NEGATIVE |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1875 |
| BZRR | THREAD SERIES | UNF |
| CFHL | THREAD CLASS | 2A |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.375 |
| BCGN | GROUNDING METHOD | INTERNAL |
| BCGS | SHAFT DRIVE END STYLE | |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES MINIMUM 4.430 AND INCHES MAXIMUM 4.450 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES MINIMUM 4.430 AND INCHES MAXIMUM 4.450 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | CLASS B AND GRADE 2 AND GROUP B |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.625 |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 4000 |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| ABFF | FURNISHED ITEMS | RADIO INTERFERENCE SHIELDING |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| ELEC | VOLTAGE IN VOLTS | 28.0 |
| ABSA | SPLINE QUANTITY | 13 |
| AAUH | SPLINE MINOR DIAMETER | INCHES MINIMUM 0.7225 AND INCHES MAXIMUM 0.7335 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.8586 AND INCHES MAXIMUM 0.8636 |
| AXFH | SPLINE LENGTH | INCHES MINIMUM 1.980 AND INCHES MAXIMUM 2.020 |
| ADER | MOUNTING STYLE |
Supersedes
This item replaces cancelled NIINs 005333008 · 007328763 · 009059791. An older drawing citing one of those numbers resolves here.