ATLASAir Supply

321-252-9430Mon–Fri · 8a–6p ET
Quote0 Request a Quote →
Home / MS parts / NSN 2920-00-215-4602
NSN 2920-00-215-4602  ·  NIIN 002154602  ·  FSC 2920
NO DASHES 2920002154602
In Stock

GENERATOR,ENGINE ACCESSORY

Engine Electrical System Components, Nonaircraft

Technical characteristics

31 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

MRCRequirementValue
CMLNMOUNTING HOLE THREAD CLASS2B
CMLPTHREAD QUANTITY PER INCH20
CMLMMOUNTING HOLE THREAD QUANTITY PER INCH16
ANTXDISTANCE FROM END TO KEYWAY CENTERINCHES NOMINAL 1.375
AWDPTHREAD DIAMETERINCHES NOMINAL 0.500
BCGMRECTIFIER LOCATIONSEPARATE
BCGNGROUNDING METHODINTERNAL
BCGSSHAFT DRIVE END STYLE
ABVAUNTHREADED PORTION LENGTHINCHES NOMINAL 1.310
ADERMOUNTING STYLE
ADZCENVIRONMENTAL PROTECTIONCORROSION RESISTANT AND FUNGUS RESISTANT
BCMDDISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKETINCHES MINIMUM 7.243 AND INCHES MAXIMUM 7.257
BCMFDISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKETINCHES MINIMUM 8.123 AND INCHES MAXIMUM 8.137
BCMHBOTTOM MOUNTING HOLE DIAMETERINCHES MINIMUM 0.451 AND INCHES MAXIMUM 0.461
ELECVOLTAGE IN VOLTS24.0
AASATHREAD LENGTHINCHES NOMINAL 0.720
AAJFTHREAD DIRECTIONRIGHT-HAND
AFYSKEYWAY LENGTHINCHES NOMINAL 0.625
AHZVSUBMERSIBILITYNONSUBMERSIBLE
AKCTSHAFT ROTATION DIRECTIONCOUNTERCLOCKWISE
BZRRTHREAD SERIESUNIFIED NATIONAL COARSE (UNC)
CFHLTHREAD CLASS2A
CMLKMOUNTING HOLE THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
CMLLMOUNTING HOLE THREAD DIAMETERINCHES NOMINAL 0.375
BCLYDISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTERINCHES NOMINAL 3.875
BCLZDISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTERINCHES NOMINAL 3.880
BCMBANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG180.0
BCMCANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG159.0
ABRRKEYWAY WIDTHINCHES NOMINAL 0.125
ABPTSECOND STEP DIAMETERINCHES NOMINAL 0.669
ABFFFURNISHED ITEMSNUT AND WOODRUFF KEY