NSN 2920-00-913-4532 · NIIN 009134532 · FSC 2920
NO DASHES 2920009134532
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES NOMINAL 3.965 |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| ADER | MOUNTING STYLE | |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 62.0 |
| BCGM | RECTIFIER LOCATION | INTEGRAL |
| BCGS | SHAFT DRIVE END STYLE | |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 3.830 |
| ABVA | UNTHREADED PORTION LENGTH | INCHES NOMINAL 1.320 |
| AFYS | KEYWAY LENGTH | INCHES NOMINAL 0.750 |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES NOMINAL 5.105 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 180.0 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| ELEC | VOLTAGE IN VOLTS | 12.0 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.814 |
| ABPT | SECOND STEP DIAMETER | INCHES MINIMUM 0.873 AND INCHES MAXIMUM 0.874 |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.156 |
| CFHL | THREAD CLASS | 2A |
| BZRR | THREAD SERIES | UNF |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.451 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.625 |
Supersedes
This item replaces cancelled NIIN 004014032. An older drawing citing one of those numbers resolves here.