NSN 2920-00-248-5402 · NIIN 002485402 · FSC 2920
NO DASHES 2920002485402
In Stock
REGULATOR,ENGINE GENERATOR
Engine Electrical System Components, Nonaircraft
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AARA | TERMINAL QUANTITY | 3 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.328 |
| ABTD | MOUNTING SLOT WIDTH | INCHES NOMINAL 0.328 |
| ABVG | MOUNTING SLOT LENGTH | INCHES NOMINAL 0.453 |
| ADER | MOUNTING STYLE | |
| ADNY | DISTANCE BETWEEN HOLES ALONG LENGTH | INCHES NOMINAL 6.000 |
| ADZC | ENVIRONMENTAL PROTECTION | WATERTIGHT |
| ANPP | OUTPUT VOLTAGE RATING IN VOLTS | MINIMUM 7.0 AND MAXIMUM 7.7 |
| ANYC | SYSTEM VOLTAGE RATING | 6.0 |
| ANYD | SYSTEM GROUND POLARITY | NEGATIVE |
| ANYE | VOLTAGE REGULATOR UNIT TYPE | TRANSISTOR W/WIRE WOUND COIL |
| ANYH | VOLTAGE REGULATOR UNIT QUANTITY | 1 |
| ANYJ | CURRENT REGULATOR UNIT TYPE | CARBON PILE |
| ANYK | CURRENT REGULATOR UNIT QUANTITY | 1 |
| ANYP | OUTPUT CURRENT RATING IN AMPS | MINIMUM 23.0 AND MAXIMUM 27.0 |
| ANYR | CIRCUIT CONTROL DEVICE TYPE | CUTOUT RELAY |
| ANYS | CUT-IN VOLTAGE RATING | MINIMUM 5.9 AND MAXIMUM 6.8 |
| ANZE | TERMINAL ENCASEMENT | NOT ENCASED |
| APAT | CENTER TO CENTER DISTANCE BETWEEN SLOTTED HOLES ALONG LENGTH | INCHES NOMINAL 6.000 |
| APAW | CENTER TO CENTER DISTANCE BETWEEN SLOTTED HOLES AND PLAIN HOLES ALONG WIDTH | INCHES MINIMUM 5.250 AND INCHES MAXIMUM 5.375 |
| CSCF | TERMINAL TYPE | LOCATION NOT OTHERWISE SPECIFIED SCREW |
Supersedes
This item replaces cancelled NIIN 007069023. An older drawing citing one of those numbers resolves here.