NSN 2920-00-294-4199 · NIIN 002944199 · FSC 2920
NO DASHES 2920002944199
In Stock
REGULATOR,ENGINE GENERATOR
Engine Electrical System Components, Nonaircraft
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.328 |
| AARA | TERMINAL QUANTITY | 4 |
| ANYP | OUTPUT CURRENT RATING IN AMPS | MINIMUM 9.0 AND MAXIMUM 11.0 |
| ANYR | CIRCUIT CONTROL DEVICE TYPE | CUTOUT RELAY |
| ANYH | VOLTAGE REGULATOR UNIT QUANTITY | 1 |
| ANYJ | CURRENT REGULATOR UNIT TYPE | WIRE WOUND COIL |
| ANYK | CURRENT REGULATOR UNIT QUANTITY | 1 |
| ANPP | OUTPUT VOLTAGE RATING IN VOLTS | MINIMUM 35.2 AND MAXIMUM 37.0 |
| ANYC | SYSTEM VOLTAGE RATING | 30.0 |
| ANYD | SYSTEM GROUND POLARITY | NEGATIVE OR POSITIVE |
| ANYE | VOLTAGE REGULATOR UNIT TYPE | WIRE WOUND COIL |
| CSCF | TERMINAL TYPE | LOCATION NOT OTHERWISE SPECIFIED THREADED STUD |
| ABTD | MOUNTING SLOT WIDTH | INCHES NOMINAL 0.328 |
| ABVG | MOUNTING SLOT LENGTH | INCHES NOMINAL 0.453 |
| APAT | CENTER TO CENTER DISTANCE BETWEEN SLOTTED HOLES ALONG LENGTH | INCHES NOMINAL 6.000 |
| APAW | CENTER TO CENTER DISTANCE BETWEEN SLOTTED HOLES AND PLAIN HOLES ALONG WIDTH | INCHES NOMINAL 5.250 |
| ADER | MOUNTING STYLE | |
| ADNY | DISTANCE BETWEEN HOLES ALONG LENGTH | INCHES NOMINAL 6.000 |
| ANYS | CUT-IN VOLTAGE RATING | MINIMUM 31.0 AND MAXIMUM 34.0 |
| ANZE | TERMINAL ENCASEMENT | NOT ENCASED |