NSN 5970-00-971-6373 · NIIN 009716373 · FSC 5970
NO DASHES 5970009716373
In Stock
INSULATION SLEEVING,ELECTRICAL,S
Electrical Insulators and Insulating Materials
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AFZY | FOURTH BRANCH INSIDE DIAMETER | AFTER UNRESTRICTED RECOVERY INCHES MAXIMUM 0.270 |
| AFZU | MAIN BODY INSIDE DIAMETER | AS SUPPLIED INCHES MINIMUM 0.760 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJH | TEMP RATING | CELSIUS -55.0 |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FLAME RESISTANT AND MILDEW RESISTANT AND SOLVENT RESISTANT AND WATER RESISTANT |
| AGAB | MAIN BODY WALL THICKNESS | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.070 |
| AGAC | FIRST BRANCH WALL THICKNESS | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.060 |
| AFZV | FIRST BRANCH INSIDE DIAMETER | AFTER UNRESTRICTED RECOVERY INCHES MAXIMUM 0.270 |
| AGAF | FOURTH BRANCH WALL THICKNESS | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.060 |
| AGAG | DISTANCE FROM EDGE OF MAIN BODY TO INTERSECTING CENTERLINES | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 1.420 |
| AFZU | MAIN BODY INSIDE DIAMETER | AFTER UNRESTRICTED RECOVERY INCHES MAXIMUM 0.380 |
| AFZW | SECOND BRANCH INSIDE DIAMETER | AS SUPPLIED INCHES MINIMUM 0.520 |
| AFZX | THIRD BRANCH INSIDE DIAMETER | AFTER UNRESTRICTED RECOVERY INCHES MAXIMUM 0.270 |
| AGAR | ANGLE BETWEEN MAIN BODY AND SECOND BRANCH CENTERLINES IN DEG | AS SUPPLIED NOMINAL 10.0 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 1500 |
| FLEX | FLEXIBILITY | SEMIRIGID |
| HUES | COLOR | BLACK |
| MATT | MATERIAL | LOCATION NOT OTHERWISE SPECIFIED PLASTIC POLYOLEFIN |
| AFZX | THIRD BRANCH INSIDE DIAMETER | AS SUPPLIED INCHES MINIMUM 0.520 |
| AGAE | THIRD BRANCH WALL THICKNESS | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.060 |
| AFZW | SECOND BRANCH INSIDE DIAMETER | AFTER UNRESTRICTED RECOVERY INCHES MAXIMUM 0.270 |
| AGAQ | ANGLE BETWEEN MAIN BODY AND FIRST BRANCH CENTERLINES IN DEG | AFTER UNRESTRICTED RECOVERY NOMINAL 45.0 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | LOCATION NOT OTHERWISE SPECIFIED MFR REF SINGLE MATERIAL RESPONSE RT-301, RAYCHE- COR |
| STYL | STYLE DESIGNATOR | |
| UKBG | DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS | VOLTS PER MIL /0.001 INCH/ 200.0 |
| AGAQ | ANGLE BETWEEN MAIN BODY AND FIRST BRANCH CENTERLINES IN DEG | AS SUPPLIED NOMINAL 10.0 |
| AGAR | ANGLE BETWEEN MAIN BODY AND SECOND BRANCH CENTERLINES IN DEG | AFTER UNRESTRICTED RECOVERY NOMINAL 15.0 |
| AFZY | FOURTH BRANCH INSIDE DIAMETER | AS SUPPLIED INCHES MINIMUM 0.520 |
| AFZZ | DISTANCE FROM INTERSECTING CENTERLINE OF MAIN BODY TO END OF SECOND BRANCH | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 1.940 |
| AGAA | DISTANCE FROM INTERSECTING CENTERLINE OF MAIN BODY TO END OF FIRST BRANCH | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 1.770 |
| AFZV | FIRST BRANCH INSIDE DIAMETER | AS SUPPLIED INCHES MINIMUM 0.520 |
| AGAD | SECOND BRANCH WALL THICKNESS | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.060 |