NSN 5990-00-845-2864 · NIIN 008452864 · FSC 5990
NO DASHES 5990008452864
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.2030 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.2500 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 1510.00 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.9995 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 256.00 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.1700 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | INCH-OUNCES NOMINAL 0.50 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0460 |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 1.9900 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.6000 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 4.2940 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 2.2500 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.2500 |
| AJTC | ZSS RESISTANCE IN OHMS | NOMINAL 285.00 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 82.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 1.9 |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQTM | TERMINAL LOCATION | REAR |
| AJSL | BODY SIZE | 23 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| CSFG | PLUS J ZSS REACTANCE IN OHMS | NOMINAL 55.50 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.783 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.250 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.6930 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 45.0 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -8.0 TO 8.0 |
| AJVM | SPLINE TOOTH QUANTITY | 22 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2800 |
| AJWV | AFT OF FIRST FLANGE DIAMETER | INCHES NOMINAL 1.9900 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNIFIED NATIONAL COARSE (UNC) |