NSN 3020-01-097-5577 · NIIN 010975577 · FSC 3020
NO DASHES 3020010975577
In Stock
GEAR,BEVEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.9500 |
| AJLA | TEETH QUANTITY | 19 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | STRAIGHT TEETH |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.020 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.347 |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWQD | PITCH ANGLE | DEGREES 45.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 1.147 |
| CWRB | BODY RECESS NOMINAL DEPTH | FIRST END INCHES 0.100 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.150 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.250 |
| CWSB | BORE NOMINAL WIDTH | BOTH ENDS INCHES 0.250 |
| CWTB | COUNTERBORE NOMINAL DEPTH | FIRST END INCHES 0.078 |
| CWTG | COUNTERBORE NOMINAL DIAMETER | FIRST END INCHES 0.437 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | SECOND END INCHES 0.937 |
| CWWN | END NOMINAL DIAMETER | SECOND END INCHES 0.437 |
| CWWS | FIRST STEP NOMINAL LENGTH | SECOND END INCHES 0.210 |
| CWXB | FIRST STEP NOMINAL DIAMETER | SECOND END INCHES 0.625 |
| MATT | MATERIAL | OVERALL BRONZE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-B-750,CO-A,1 TO 2HARD |
| STYL | STYLE DESIGNATOR |