NSN 5990-00-644-0076 · NIIN 006440076 · FSC 5990
NO DASHES 5990006440076
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJVC | COMPENSATOR DC RESISTANCE IN OHMS | NOMINAL 5.80 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.2420 AND INCHES MAXIMUM 0.2520 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 2.60 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 8 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, THREADED |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.090 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.250 |
| AJTX | COMPENSATION METHOD | WINDING COMPENSATED |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 1.80 |
| AJWV | AFT OF FIRST FLANGE DIAMETER | INCHES MINIMUM 1.9985 AND INCHES MAXIMUM 1.9995 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.2402 AND INCHES MAXIMUM 0.2405 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.6930 AND INCHES MAXIMUM 0.7190 |
| AJSL | BODY SIZE | 23 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | MAXIMUM 30.0 |
| CQTM | TERMINAL LOCATION | REAR |
| AAZX | SECOND SHOULDER LENGTH | INCHES MAXIMUM 0.1700 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 1.900 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 20.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0460 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.9850 AND INCHES MAXIMUM 1.9900 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MINIMUM 3.9230 AND INCHES MAXIMUM 3.9380 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 2.2490 AND INCHES MAXIMUM 2.2500 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| ABPM | BODY DIAMETER | INCHES MINIMUM 0.9850 AND INCHES MAXIMUM 1.9900 |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3100 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 1000.0 |
| AAQL | BODY STYLE | |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.2480 AND INCHES MAXIMUM 0.2500 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.5990 AND INCHES MAXIMUM 0.6000 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES MINIMUM 1.9850 AND INCHES MAXIMUM 1.9995 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 4.7360 AND INCHES MAXIMUM 4.7870 |
Supersedes
This item replaces cancelled NIIN 005650588. An older drawing citing one of those numbers resolves here.