NSN 5315-01-518-5800 · NIIN 015185800 · FSC 5315
NO DASHES 5315015185800
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Application: AIRCRAFT, HORNET F/A-18 (E/F)
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.345 |
| AATR | SHANK LENGTH | INCHES NOMINAL 0.470 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.367 AND INCHES MAXIMUM 0.376 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1895 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.035 |
| ABRB | HOLE ARRANGEMENT STYLE | |
| ABRC | FIRST HOLE DIAMETER | INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.086 |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES NOMINAL 0.140 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, HORNET F/A-18 (E/F) |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.030 |
| AMFM | SECOND END TAPER LENGTH | INCHES MINIMUM 0.170 AND INCHES MAXIMUM 0.210 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.1900 |
| CQTR | SECOND SHANK DIAMETER | INCHES MINIMUM 0.1851 AND INCHES MAXIMUM 0.1863 |
| CRDY | FIRST END LOCATION | THREADED END |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CSGL | SECOND END TIP RADIUS | INCHES MINIMUM 0.060 AND INCHES MAXIMUM 0.090 |
| CWAS | SECOND SHANK LENGTH | INCHES NOMINAL 0.440 |
| MATT | MATERIAL | OVERALL STEEL |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |