NSN 5315-01-530-6563 · NIIN 015306563 · FSC 5315
NO DASHES 5315015306563
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Application: F-15
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN,INDEX |
| MATT | MATERIAL | OVERALL STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 303SE |
| CRXJ | FIRST END TIP RADIUS | INCHES MINIMUM 0.060 AND INCHES MAXIMUM 0.090 |
| CTHC | SECOND END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQTR | SECOND SHANK DIAMETER | INCHES MINIMUM 0.185 AND INCHES MAXIMUM 0.186 |
| CRDY | FIRST END LOCATION | THREADED END |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES NOMINAL 0.140 |
| AGAV | END ITEM IDENTIFICATION | F-15 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.125 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.367 AND INCHES MAXIMUM 0.376 |
| AAZE | SHANK DIAMETER | INCHES NOMINAL 0.189 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 0.845 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.345 |
| ABRB | HOLE ARRANGEMENT STYLE | |
| ABRC | FIRST HOLE DIAMETER | INCHES NOMINAL 0.076 |
| CWAS | SECOND SHANK LENGTH | INCHES NOMINAL 0.250 |
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| AAJD | THREAD CLASS | 3A |
| AATR | SHANK LENGTH | INCHES NOMINAL 0.125 |