NSN 5990-00-704-9787 · NIIN 007049787 · FSC 5990
NO DASHES 5990007049787
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJTS | ROTOR DC RESISTANCE IN OHMS | MINIMUM 180.00 AND MAXIMUM 220.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | MINIMUM 265.50 AND MAXIMUM 324.50 |
| AJTX | COMPENSATION METHOD | RESISTOR COMPENSATED |
| AJVC | COMPENSATOR DC RESISTANCE IN OHMS | MINIMUM 265.50 AND MAXIMUM 324.50 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 45.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJVD | COMPENSATOR TRANSFORMATION RATIO IN PERCENT | ROTOR TO COMPENSATOR NOMINAL 15.000 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MINIMUM 4.000 AND INPUT TO OUTPUT MAXIMUM 8.000 |
| AJVJ | INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| AJVK | OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.1 TO 0.1 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0370 AND INCHES MAXIMUM 0.0430 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MINIMUM 1.8920 AND INCHES MAXIMUM 1.9540 |
| CQTM | TERMINAL LOCATION | REAR |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR MINIMUM 0.960 AND ROTOR TO STATOR MAXIMUM 1.000 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 12 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.3810 AND INCHES MAXIMUM 0.4490 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.3117 AND INCHES MAXIMUM 1.3120 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.8745 AND INCHES MAXIMUM 0.8750 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.2730 AND INCHES MAXIMUM 2.4030 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.4360 AND INCHES MAXIMUM 1.4370 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0900 AND INCHES MAXIMUM 0.0960 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 1.3090 AND INCHES MAXIMUM 1.3150 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0780 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.1290 AND INCHES MAXIMUM 0.1350 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1248 AND INCHES MAXIMUM 0.1250 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | MINIMUM 30.0 AND MAXIMUM 45.0 |
| AJSL | BODY SIZE | 15 |