NSN 3120-00-110-8542 · NIIN 001108542 · FSC 3120
NO DASHES 3120001108542
In Stock
BEARING,PLAIN,ROD END
Bearings, Plain, Unmounted
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGKP | STATIC RADIAL LOAD RATING | POUNDS 12000 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.625 |
| MATT | MATERIAL | RACE INSERT STEEL |
| MATT | MATERIAL | RACE LINER PLASTIC TETRAFLUOROETHYLENE |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 77272-5307 AND SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 77272-5424 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | INCHES MINIMUM 1.8100 AND INCHES MAXIMUM 1.8300 |
| AGGG | BORE CENTER TO SHANK END DISTANCE | INCHES MINIMUM 3.0450 AND INCHES MAXIMUM 3.0650 |
| AGGH | OUTER MEMBER WIDTH | INCHES MINIMUM 0.5550 AND INCHES MAXIMUM 0.5650 |
| AGGJ | INNER MEMBER WIDTH | INCHES MINIMUM 0.6860 AND INCHES MAXIMUM 0.6880 |
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 1.6650 AND INCHES MAXIMUM 1.6850 |
| MATT | MATERIAL | ROD END BODY STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER MEMBER MIL STD SINGLE MATERIAL RESPONSE A-S 5630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RACE LINER MFR REF SINGLE MATERIAL RESPONSE 77272114CS123-1 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROD END BODY MIL STD SINGLE MATERIAL RESPONSE -IL-S-5000 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL STD SINGLE TREATMENT RESPONSE QQ--416 |
| CQFM | HARDNESS RATING | ROD END BODY ROCKWELL C NOMINAL 41.0 |
| FEAT | SPECIAL FEATURES | 8 DEG SELF-ALIGNMENT IN EITHER DIRECTION |
| MATT | MATERIAL | INNER MEMBER STEEL |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 3.9600 AND INCHES MAXIMUM 3.9800 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQFM | HARDNESS RATING | INNER MEMBER ROCKWELL C NOMINAL 58.0 |
| CQFM | HARDNESS RATING | RACE INSERT ROCKWELL C NOMINAL 32.0 |