NSN 3120-00-411-0033 · NIIN 004110033 · FSC 3120
NO DASHES 3120004110033
In Stock
BEARING,PLAIN,ROD END
Bearings, Plain, Unmounted
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | INNER MEMBER STEEL |
| MATT | MATERIAL | INTERNAL ROD END BODY STEEL |
| MATT | MATERIAL | RACE INSERT STEEL |
| MATT | MATERIAL | RACE LINER PLASTIC TETRAFLUOROETHYLENE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER MEMBER MIL STD SINGLE MATERIAL RESPONSE A-S 5630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INTERNAL ROD END BODY MIL STD SINGLE MATERIAL RESPONSE A-S 5643 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RACE INSERT MIL STD SINGLE MATERIAL RESPONSE A-S 5643 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RACE LINER MFR REF SINGLE MATERIAL RESPONSE 114CS125-2,77272 |
| STYL | STYLE DESIGNATOR | |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.5625 AND INCHES MAXIMUM 2.6050 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.3120 AND INCHES MAXIMUM 0.3125 |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | INCHES MINIMUM 1.0210 AND INCHES MAXIMUM 1.0660 |
| AGGG | BORE CENTER TO SHANK END DISTANCE | INCHES MINIMUM 2.0520 AND INCHES MAXIMUM 2.0720 |
| AGGH | OUTER MEMBER WIDTH | INCHES MINIMUM 0.3220 AND INCHES MAXIMUM 0.3320 |
| CQFM | HARDNESS RATING | ROD END BODY ROCKWELL C NOMINAL 40.0 |
| FEAT | SPECIAL FEATURES | 12.0 DEG MISALIGNMENT IN EITHER DIRECTION |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.375 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | INNER MEMBER ROCKWELL C NOMINAL 56.0 |
| CQFM | HARDNESS RATING | RACE INSERT ROCKWELL C NOMINAL 30.0 |
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 1.2200 AND INCHES MAXIMUM 1.3100 |
| AGKP | STATIC RADIAL LOAD RATING | POUNDS 7400 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AGGJ | INNER MEMBER WIDTH | INCHES MINIMUM 0.4320 AND INCHES MAXIMUM 0.4370 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 77272-BAC5424 |