NSN 4720-00-618-6875 · NIIN 006186875 · FSC 4720
NO DASHES 4720006186875
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.750 |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING STEEL |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | FIRST END COMPLETE FITTING CADMIUM |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 2B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER MOLDED RUBBER |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 14000.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | FUEL RESISTANT AND OIL RESISTANT |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.844 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 5.000 |
| AHNC | CONNECTION STYLE | |
| SCMP | ITEM STRUCTURAL COMPOSITION | THIRD LAYER BRAIDED STEEL WIRE |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNF |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, BUNA-N |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIFTH LAYER BRAIDED COTTON CORD |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED STEEL WIRE |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.375 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 200.0 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 4000.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| SCMP | ITEM STRUCTURAL COMPOSITION | FOURTH LAYER MOLDED RUBBER |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 12.500 |