NSN 3020-00-374-9422 · NIIN 003749422 · FSC 3020
NO DASHES 3020003749422
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWXY | FIRST GROOVE NOMINAL WIDTH | SECOND END INCHES 0.437 |
| ANTP | BORE STYLE | |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 4.5000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C NOMINAL 58.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 6.362 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 22.5000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 1.023 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-13048 |
| STYL | STYLE DESIGNATOR | |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | SECOND END INCHES 4.875 |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | SECOND END INCHES 0.502 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.940 |
| MATT | MATERIAL | OVERALL STEEL |
| AJLA | TEETH QUANTITY | 43 |
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 36 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 6.1429 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.941 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 4.668 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | BOTH ENDS INCHES 5.312 |
Supersedes
This item replaces cancelled NIIN 006300118. An older drawing citing one of those numbers resolves here.